Disable LAN phy after disable LAN controller.
Patch CPU/memory change message when UEFI OS insert
Update PCI_E5 setting for Dual Gtraphics
Sobald es neuere Uefiversionen gibt, stellst du die dann auch hier rein ?Ab und zu mal dran erinnern :D
Update MsiOc_Trinity
Remove No use option in RAID driver.
Fix BIOS Mode change fail sometime.
Disable COM port, hidden SIO setting.
Fix clear CMOS, POST not stop F1/F2 page.
Fix CPU_BRAND_NAME lost char not complete.
memory size show error in system state page.
Finish msi CPU Specifications info.
Add module:
a. ClearCMOSForAP
b. OEMChangeID
c. PowerLoss
d. SioVol
e. SmartFan
f. Up6262
g. WakeupEvent
Update UefiRaid Driver Module to 13.
Update 4.6.4_UEFI_NETWORK_STACK_II_07.
Hidden \"DRAM Switch Frequency\" item in PCB2.0.
Aktuell ist das E7793AMS.183Hier wird feedgebackt :-D
update M-FlashAktuell:
Correct smartFAN setting.
Correct Voltage setting.
Adjust M-Flash ROM layout.
Adjust setup CPU-Z CPU brand string length.
Adjust Dual Graphics setting.
Fix USB3.0 porting wrong.
Fix NB PCI-E port not support wakeup.
Fix UEFI RAID driver not work.
Change OVT 85 setting.
Fix LAN disable function.
Finish postmessage CPU&Memory info.
Adjust setup string.
Add OVT 87 setting.
Add MFlash.
Adjust setup menu.
Ja, es gibt etwas Neues:Etwas? Scheint ja kaum noch was vom Release-BIOS übrig zu sein.
Ich probiere es mal. Ist AFUDE238S gestorben?Nein
Es sind im Prinzip beides die gleichen Dateien. Damit man keine zusätzlichen Optionen eingeben muß, sind diese im Programm bereits eingestellt:
Bei AFUDE238 sind das /P /B /N und
bei AFUD238S sind das /P /B /N /K /R
Add oc profile item.
Remove UpdateME item.
Fix postmsg error when clear cmos.
Update MSI MGSEII / ClickBIOSUI module.
Update SMBIOS type0 setting.
Save ROMHOLE during M-Flash update BIOS.
Remove unknown device in setup bootmenu.
Fix POST CPU/Memory info empty.
Update BIOS follow CRB_msi003.
Update vom AMI AGESA
- PCI_E2 supports up to PCIE x16 speed (when PCI_E5 is empty) or PCIe x8 speed (when PCI_E5 is installed)
Ich habe nur noch ne Creative Recon 3D und ne Wificard in 2 PCIe x1 Slots.Ändert sich was wenn du mal testweise diese Karten rausnimmst?
keine Anzeige mehr.Stecker raus, CMOS-Reset mit JBAT1 gemacht?